Fireye 85UVF1A-1QD 火焰扫描仪采用固态火焰探测传感器

品牌：Fireye

型号：85UVF1A-1QD

名称：火焰扫描仪

质保：一年

联系电话：18059884797

详细介绍

85UVF1A-1QD 火焰扫描仪

Fireye Phoenix 系列 2 型 85UVF/IRF 火焰扫描仪是基于微处理器的设备，采用固态火焰探测传感器。Phoenix火焰扫描仪集成了一个内部火焰继电器，可自动设置开/关阈值，因此无需远程火焰放大器或火焰开关。Phoenix扫描仪在很宽的频率范围内检测目标火焰内发生的调制幅度（火焰“闪烁”）。在扫描仪设置过程中，火焰扫描仪会自动存储目标火焰的振幅，以及佳的开/关标准。自动选择适当的传感器增益。Phoenix 扫描仪集成了全面的自诊断和电子自检功能。Phoenix 85UVF/IRF 有多种型号可供选择，根据光谱范围、危险区域认证级别和机构批准进行区分。请参阅第 1 页的表 3，了解型号与产品认证的概述。Phoenix 85UVF/IRF 火焰扫描仪由 24Vdc 供电。电气连接通过 8 针电气快速断开（QD）进行。标配 4 至 20mA 模拟输出的阻燃强度
Fireye 85UVF1A-1QD 火焰扫描仪采用固态火焰探测传感器

The Fireye Phoenix Series Type 2 85UVF/IRF flame scanner is a microprocessor based device that uses solid-state flame detection sensors. The Phoenix flame scanner integrates an internal flame relay that can automatically set on/off thresholds, eliminating the need for remote flame amplifiers or flame switches. The Phoenix scanner detects the modulation amplitude (flame "flicker") occurring within the target flame over a wide frequency range. During the scanner setup process, the flame scanner will automatically store the amplitude of the target flame and the optimal on/off standard. Automatically select the appropriate sensor gain. The Phoenix scanner integrates comprehensive self diagnosis and electronic self check functions. The Phoenix 85UVF/IRF has multiple models to choose from, distinguished by spectral range, hazardous area certification level, and agency approval. Please refer to Table 3 on page 1 for an overview of model and product certification. The Phoenix 85UVF/IRF flame scanner is powered by 24Vdc. The electrical connection is made through an 8-pin electrical quick disconnect (QD). Standard flame retardant strength with 4 to 20mA analog output Fireye 85UVF1A-1QD 火焰扫描仪采用固态火焰探测传感器